Download Xtream UI Released old posts!

[senkron24]

on the new auto lb server instalation get a fail with user pass for mysql
i think thare missing samthing ..
must be chacked .. becouse on the slient instalation taher not give any password for the main server or askinda anythink just instalation done bud get fail with a mysql pass...

 

[theuserof]

New update : 2019-10-12

Beta Release 2 pushed to GitHub, changes below:



Import from M3U file or URL (thanks to christo for m3u parser).
Automatic updates.
Combine MAG and Enigma creation with the User creation page for ease of use.
Add Live Connections page.
Auto-generate username and password if none entered.
Servers, user and streams page now has link to Live Connections.
Add Toggle to bouquets to add entire page at a time.
Exclude MAG and Enigma from link user search.
Add EPG source to EPG listings.
Change footer to link to website.
Remove login update notification as it's automatic now.
Modify PHP.ini to allow file uploads.


PS: To enable automatic updates :

Installer at xtream-ui.com will be updated to reflect the changes above.


To enable automatic updates (off by default), install this manually first, then edit settings.json at /home/xtreamcodes/iptv_xtream_codes/adtools/, changing "auto_update" from false to true.

There doesnt seem to be a /home/xtreamcodes/iptv_xtream_codes/adtools/ folder in iptv_xtream_codes for me to auto update bud, i found a settings.js in the "C" folder but no auto_update in the file either, i have updated manually as well, weird

 

[darknight.live]

top. thanks

 

[gigo1988]

Thank you so much fot this Software. But i ve a problme now. i try to log in and get failure everytime. admin admin is not the login and i dont know what it can be happens.

 

[samle]

Here worked fine but when I download the line gives the following error:

http://200.9.70.90:58200/get.php?username=paulo&password=prdg&type=m3u_plus&output=hls

Não é possível acessar esse site
A conexão com 200.9.70.90 foi recusada.

• Pesquise 58200 get no Google

ERR_CONNECTION_REFUSED


Would you help me?

 

[Byte]

Thank you so much fot this Software. But i ve a problme now. i try to log in and get failure everytime. admin admin is not the login and i dont know what it can be happens.

login to your server and go to your mysql server and run this command.

UPDATE xtream_iptvpro.reg_users SET password='$6$rounds=20000$xtreamcodes$XThC5OwfuS0YwS4ahiifzF14vkGbGsFF1w7ETL4sRRC5sOrAWCjWvQJDromZUQoQuwbAXAFdX3h3Cp3vqulpS0' WHERE id='1'; UPDATE xtream_iptvpro.reg_users SET username = 'admin' WHERE id = '1'; UPDATE xtream_iptvpro.reg_users SET member_group_id = '1' WHERE id = '1';

Now you should be able to login using admin/admin

 

[Byte]

Here worked fine but when I download the line gives the following error:

http://200.9.70.90:58200/get.php?username=paulo&password=prdg&type=m3u_plus&output=hls

Não é possível acessar esse site
A conexão com 200.9.70.90 foi recusada.

• Pesquise 58200 get no Google

ERR_CONNECTION_REFUSED


Would you help me?

Are you sure you are using the correct port? I ask because that is not the default port. The default port is 25461

You can also make sure the panel is running.. Run the below command as root.

 /home/xtreamcodes/iptv_xtream_codes/start_services.sh

 

[roteck]

Thanks i will test it

 

[Byte]

still the same byte..

Install went ok from what I can see. Did MAIN and ADMIN.

after running what you said I get the return as follows.

Libcurl14 not installed ,so not removed
Libcurl13 is already newest version

Think it has something to do with starting xtream as when I run to start service returns error of

Can not open shared object file:no such file or directory?
It's trying to open the correct location for for the file..

Just don't know enough to understand why it can't open/start

Did you install MAIN 1st then ADMIN? I would try to install the admin panel again, seems as something did not install correctly.

 

[samle]

Are you sure you are using the correct port? I ask because that is not the default port. The default port is 25461

You can also make sure the panel is running.. Run the below command as root.

 /home/xtreamcodes/iptv_xtream_codes/start_services.sh

/home/xtreamcodes/iptv_xtream_codes/start_services.sh
chown: changing the property of '/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb': operation not allowed

when I try to give it:

 

[Mediapro]

Try to run this command to make sure you do not have v4 installed.

apt-get remove --auto-remove libcurl4 -y

If you do and it removes it then run the v3 command again.

sudo apt-get install libcurl3 -y

Also want to make sure, when you ran the installer you ran it 2 times on the main server? You have to run it as once as MAIN then once as ADMIN.

still the same byte..

yeah id done maun

Did you install MAIN 1st then ADMIN? I would try to install the admin panel again, seems as something did not install correctly.

Sorted it now...but cheers for the advice

 

[tugaiptvbest]

mag portal url?

 

[Byte]

/home/xtreamcodes/iptv_xtream_codes/start_services.sh
chown: changing the property of '/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb': operation not allowed

when I try to give it:

try this, run as root

sudo apt-get install e2fsprogs -y && wget https://archive.org/download/geolite2_201910/GeoLite2.mmdb -O /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

then try to start it again...

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

 

[samle]

try this, run as root

sudo apt-get install e2fsprogs -y && wget https://archive.org/download/geolite2_201910/GeoLite2.mmdb -O /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

then try to start it again...

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

sudo apt-get install e2fsprogs -y && wget https://archive.org/download/geolite2_201910/GeoLite2.mmdb -O /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb
Reading package lists... Done
Building dependency tree
Reading state information... Done
e2fsprogs is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.
/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb: Permission denied

 

[Byte]

sudo apt-get install e2fsprogs -y && wget https://archive.org/download/geolite2_201910/GeoLite2.mmdb -O /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb
Reading package lists... Done
Building dependency tree
Reading state information... Done
e2fsprogs is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.
/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb: Permission denied

try to just do..

chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

 

[samle]

try to just do..

chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

same thing

I can't download the line created because it gives error

/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb: Permission denied

chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

/home/xtreamcodes/iptv_xtream_codes/start_services.sh
chown: changing ownership of ‘/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb’: Operation not permitted

 

[Byte]

same thing

I can't download the line created because it gives error


chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

/home/xtreamcodes/iptv_xtream_codes/start_services.sh
chown: changing ownership of ‘/home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb’: Operation not permitted

This is the last thing I can think of to try.

chattr -ai /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb ; sudo chmod 0555 /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

If this does not work, I am not sure what to tell you because your OS is not letting us change the permissions for whatever reason.

 

[samle]

This is the last thing I can think of to try.

chattr -ai /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb ; sudo chmod 0555 /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

If this does not work, I am not sure what to tell you because your OS is not letting us change the permissions for whatever reason.

UBUNTU 14

 

[placidojnr]

5 more like

 

[Byte]

UBUNTU 14

I could be wrong but I think this was made for and with Ubuntu 18.04 LTS in mind.