Resource CK Mods v41 Mod 41

[jimser]

go

php-fpm: pool xtreamcodes

I also used htop and all by php-fpm process.

https://imgur.com/wFKIOHH

t the ram problem here to
panel eats up all ram on the main (no streams on it)
allready tried the memmory fix for mysql but no bettering

 

[adilos]

Hello did someone have fixed the problem of folder watch is not working more after update to 24

 

[Deleted member 6498]

Hi, I have the same issue, CPU at 100% but only in the evenings around 20, 21 and 22.
Any idea?
Seems that the official distribution (not mods) doesn't have this issue.

Thanks

I am =

 

[Fringe]

Anyone had any issues adding a new LB server? Its been a while since I needed to add a new LB but for some reason I can not get the server to go live on the panel.

I have installed it OK, all files and folders are on the server, its been added to the Panel and it shows as offline, I have rebooted the server, fast reload and even Full Reload the server but it just will not go live. I can see the server on the DB Table but it doesn't have much data. The UFW is disabled so no port blocking and the GeoLite2.mmdb file is there (and not 0kb in size). I've even changed the status from 2 to 1 via the DB (MySQL) but nothing happened.

When I look on Process Monitor it just says 'No data available in table' but on the dashboard its showing the correct 'Uptime' for the server and its running Ubuntu 18.04 and yes I have run /home/xtreamcodes/iptv_xtream_codes/start_services.sh and added it to cron for reboots.

Does anyone have any ideas as I am stuck now, I just don't know what I'm missing, lol... I'm using 22F Mods 24 panel

UPDATE:
So I got the LB to actaully start working using the following...

As root via SSH run the following commands

sudo chattr -i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

sudo chmod 777 /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

So I hope this helps anyone having the same issues.

 

[grupatnt2020]

hi

got a solution

make anew dir:
sudo mkdir /etc/systemd/system/mysql.service.d

create a new file:
nano /etc/systemd/system/mysql.service.d/override.conf

Place this inside:

[Service]
LimitNOFILE=8402
Environment="TZ=Europe/Vienna"
Environment="LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1"

realod services:
systemctl daemon-reload

restart mysql:
systemctl restart mysql.service

chekc if it is running:
pt-mysql-summary | grep -A5 -i "memory management"

Is this only for main, or it should be done on LBs too?

 

[joelonlyne]

Anyone had any issues adding a new LB server? Its been a while since I needed to add a new LB but for some reason I can not get the server to go live on the panel.

I have installed it OK, all files and folders are on the server, its been added to the Panel and it shows as offline, I have rebooted the server, fast reload and even Full Reload the server but it just will not go live. I can see the server on the DB Table but it doesn't have much data. The UFW is disabled so no port blocking and the GeoLite2.mmdb file is there (and not 0kb in size). I've even changed the status from 2 to 1 via the DB (MySQL) but nothing happened.

When I look on Process Monitor it just says 'No data available in table' but on the dashboard its showing the correct 'Uptime' for the server and its running Ubuntu 18.04 and yes I have run /home/xtreamcodes/iptv_xtream_codes/start_services.sh and added it to cron for reboots.

Does anyone have any ideas as I am stuck now, I just don't know what I'm missing, lol... I'm using 22F Mods 24 panel

UPDATE:
So I got the LB to actaully start working using the following...

As root via SSH run the following commands

sudo chattr -i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

sudo chmod 777 /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

So I hope this helps anyone having the same issues.

Hi , mate.

You need to modify the NGINX conf file to fix that.

Check the ports used in the panel have to be the same in the NGINX config file.

 

[jimser]

did the ram problem get fixed? or is there a solution?

 

[sanchill]

can anyone help me clean install xtream UI mod i got error

404 Not Found​

---

nginx/1.14.0

 

[@TealcAvalon]

can anyone help me clean install xtream UI mod i got error

404 Not Found​

---

nginx/1.14.0

You haven't installed @cesarkrespo mods or at least you haven't done it the right way, since nginx version should be
nginx version: nginx/1.16.1

In this thread there are a lot of people that explains how to do it, you can start here:

To view the content, you need to Sign In or Register.

 

[@TealcAvalon]

did the ram problem get fixed? or is there a solution?

There is currently, at least not with me, no problem with high CPU/RAM on this version of mods from @cesarkrespo still I would like to state that I've installed this mods with mariaDB and not mysql (that comes normally with every xtreamui installation), so if you do have problems you can start with this:

To view the content, you need to Sign In or Register.

or this:

To view the content, you need to Sign In or Register.

And if you would like to install XtreamUI MODS from @cesarkrespo with mariaDB try this (warning this is for the initial installation, if you're already running XtreamUI this is WILL NOT work out-of-the-box):

To view the content, you need to Sign In or Register.

If you're running XtreamUI and would like to change from mysql to mariaDB you could start here:

To view the content, you need to Sign In or Register.

Good luck, and don't forget >>> BACKUP FIRST!

 

[terenceslattery]

Hello did someone have fixed the problem of folder watch is not working more after update to 24

Yeah I'm suffering this also. Only adds some of the content when it runs. I tried swapping the watch php files with an older release but that created other problems so just updated to latest mod version again with the bug on folder watch, hopefully it's fixed in next release.

 

[@TealcAvalon]

Yeah I'm suffering this also. Only adds some of the content when it runs. I tried swapping the watch php files with an older release but that created other problems so just updated to latest mod version again with the bug on folder watch, hopefully it's fixed in next release.

Can you explain what is exactly the problem you're having? I can't understand and I would like to reproduce this problem so I see how can I fix this.

 

[terenceslattery]

Can you explain what is exactly the problem you're having? I can't understand and I would like to reproduce this problem so I see how can I fix this.

Yeah so the folder watch job will run but not all content gets scanned and updated. You also cannot bulk insert Movies also, if you have a folder of Movies like Action for example and you insert the folder it will only add an initial handful of Movies with subsequent loads adding one or two each time. Folder watch works the same on series, not all series get added to panel when it runs and when it does add some to panel not all episodes get added (not due to exceptions neither, they don't appear on the watch output it as if they are not there). Permissions all fine also.

 

[Fringe]

Yeah so the folder watch job will run but not all content gets scanned and updated. You also cannot bulk insert Movies also, if you have a folder of Movies like Action for example and you insert the folder it will only add an initial handful of Movies with subsequent loads adding one or two each time. Folder watch works the same on series, not all series get added to panel when it runs and when it does add some to panel not all episodes get added (not due to exceptions neither, they don't appear on the watch output it as if they are not there). Permissions all fine also.

Do a Full Remake of your main server, this solved the issue with Folder Watch, as for adding bulk movies via folder option, select Scan Recursively so it checks all the folder for files.

 

[terenceslattery]

Do a Full Remake of your main server, this solved the issue with Folder Watch, as for adding bulk movies via folder option, select Scan Recursively so it checks all the folder for files.

I've done that but still doesn't resolve it. I'm at a loss as to what is causing it, tried everything.

If I bulk import a movie folder with individual movie files they will get added no problem, but when there are folders and scan recursively is selected it will insert around ten files from the various sub folders, but ignores the rest of them.

 

[@TealcAvalon]

I've done that but still doesn't resolve it. I'm at a loss as to what is causing it, tried everything.

If I bulk import a movie folder with individual movie files they will get added no problem, but when there are folders and scan recursively is selected it will insert around ten files from the various sub folders, but ignores the rest of them.

You should open a thread specific for this, explain all the steps with the most information you can give

 

[allserveruk]

errors in datbaes every where

 

[hadyhady007]

Hi guys,

Can you see the amount of online MAG users watching streams on the panel with any of the latest mod releases?

 

[verarsche]

i make a fresh instal on a frash server but aithing is worng the tab logo is a blackhut icon and the main with no stream have 24 procent work ? why is that ? can anione say anithing for that ? sorry my english is bad thank

 

[cesarkrespo]

i make a fresh instal on a frash server but aithing is worng the tab logo is a blackhut icon and the main with no stream have 24 procent work ? why is that ? can anione say anithing for that ? sorry my english is bad thank

I was the one who inserted this, if you want to exchange it for another one

/home/xtreamcodes/iptv_xtream_codes/admin/assets/images/favicon.ico