Question Multiple connections problem in XUI!!!

[pram0s]

who can help me?
I come from xtream-ui and am currently on xui one.
It turns out that in xtream it limited a line to 1 connection and if more than 1 were connected it blocked them.
In xui, not only does it not block my connections, but the number of connections that a line has does not appear either.

Would anyone know a solution to this problem?

Thanks and greetings!

 

[hustle12]

who can help me?
I come from xtream-ui and am currently on xui one.
It turns out that in xtream it limited a line to 1 connection and if more than 1 were connected it blocked them.
In xui, not only does it not block my connections, but the number of connections that a line has does not appear either.

Would anyone know a solution to this problem?

Thanks and greetings!

I may be misreading what your needing but i believe you need to go in panel to MANAGEMENT, then SERVICE SETUP, then PACKAGES. Then you need a package created for 2 conn or whatever you want to allow. When setting up or editing that package be sure to go to the options tab there and set MAX CONNECTIONS at whatever you are looking for it to be.

Hopefully this helps

 

[pram0s]

I may be misreading what your needing but i believe you need to go in panel to MANAGEMENT, then SERVICE SETUP, then PACKAGES. Then you need a package created for 2 conn or whatever you want to allow. When setting up or editing that package be sure to go to the options tab there and set MAX CONNECTIONS at whatever you are looking for it to be.

Hopefully this helps

Thanks for responding! I have the package configured for max 1 connection. The problem is that the same line can be connected from several devices even though it is limited to a single connection, and it does not appear to me how many connections are active on that line.

 

[alqui82]

Thanks for responding! I have the package configured for max 1 connection. The problem is that the same line can be connected from several devices even though it is limited to a single connection, and it does not appear to me how many connections are active on that line.

It is NOT package oriented it is line or mag oriented once you create a line you set max conx

 

[pram0s]

It is NOT package oriented it is line or mag oriented once you create a line you set max conx

Yes, the line is configured for a maximum connection.
The problem is that the connection limitation is not working.
It is allowing a line of 1 maximum connection to be accessed by 2 devices at the same time.

 

[alqui82]

Yes, the line is configured for a maximum connection.
The problem is that the connection limitation is not working.
It is allowing a line of 1 maximum connection to be accessed by 2 devices at the same time.

If like this it will restart the line in both devices.

Just use device lock and only first one device will be able to use the line

 

[pram0s]

If like this it will restart the line in both devices.

Just use device lock and only first one device will be able to use the line

What do you mean by device lock?

Why in Xui one, when 2 clients connect to the same line and it is limited to 1 connection, do 2 connected clients not appear?

Is there any option for 2 connections to appear?

My problem is that several are connecting to the same line and I have no way to check it.

Update1
the problem was setting Disallow if Connections <= to 1.
I configured this but it didn't work because I had the prebuffer at 30.
changing the prebuffer to 0 already blocks connections.

but if someone tries to connect to the same line I would have no way of checking it, in xtream-ui all the connections that were trying to connect appeared.

This is for security in case one of my lines is shared on the internet.

Greetings and thanks to all!!

Update2
I update what I have achieved:

By activating this option "Disallow 2nd IP" and configuring this other "Disallow if Connections <=" in 3 I have managed to block connections from different IPs on the lines and respect the maximum number of connections, but when they connect from the same IP It does not block the connection but it does create intermittent interruptions (for this I had to configure the stream prebuffer to 0).

Would anyone know how to also block connections from the same IP?

all the best!

 

[admobwebmaster]

What do you mean by device lock?

Why in Xui one, when 2 clients connect to the same line and it is limited to 1 connection, do 2 connected clients not appear?

Is there any option for 2 connections to appear?

My problem is that several are connecting to the same line and I have no way to check it.

Update1
the problem was setting Disallow if Connections <= to 1.
I configured this but it didn't work because I had the prebuffer at 30.
changing the prebuffer to 0 already blocks connections.

but if someone tries to connect to the same line I would have no way of checking it, in xtream-ui all the connections that were trying to connect appeared.

This is for security in case one of my lines is shared on the internet.

Greetings and thanks to all!!

Update2
I update what I have achieved:

By activating this option "Disallow 2nd IP" and configuring this other "Disallow if Connections <=" in 3 I have managed to block connections from different IPs on the lines and respect the maximum number of connections, but when they connect from the same IP It does not block the connection but it does create intermittent interruptions (for this I had to configure the stream prebuffer to 0).

Would anyone know how to also block connections from the same IP?

all the best!

I have the same problem as you, my friend, my xui does not block connections from the same IP even after activating the option to block the same IP.

 

[onlyone311]

check if you have redis off from the panel