xtream codec v1 balance does not load help please

[mileta5]

1. login to your loadbalancer server via ftp...
2. navigate to your /etc/ folder and you'll find "hosts" file
3. download/edit the file and make sure you add line

xxx.xxx.xxx.xxx xtream-codes.com
(where xxx is the ipaddress of your MAIN SERVER)
4. save file or upload it to the server replacing original file.
5. go back to your main panel, remove the servers and readd them again

after that panel show message 'your licence is not valid"

 

[kskturk]

Make sure your LB server is Ubuntu 14.04, fresh install, and you also must have root ssh access by remote login. If not, then below is how to set that up. The last thing I did was edit my hosts file, instructions below.. After I did that I tired to install the LB server and after a few mins it worked. I repeated th

How to enable root user and allow Root Login
1) sudo passwd root
2) enter in your su password
3) enter in unix password for root user
4) enter in unix password for root user again
5) su -
6) sudo nano /etc/ssh/sshd_config
Now scroll down and look for "PermitRootLogin" and change "prohibit-password" to "yes"
7) press Ctrl+X
8) press enter to save changes
9) sudo service ssh restart

How to edit your hosts file
1) sudo nano /etc/hosts
2) under the ip "127.0.0.1" add your main server IP space and then xtream-codes.com
7) press Ctrl+X
8) press enter to save changes

Hope this helps

127.0.0.1 xtream-codes.com add /etc/hosts conf

licence error

help me

 

[Byte]

127.0.0.1 xtream-codes.com add /etc/hosts conf

licence error

help me

Do not put local host as the domain. Make a new line under it, and the IP needs to be your main server aka panel server ip. Hope this helps.