Balancer mem usage

[Dudi]

Tell me why it shows 0?

Screenshot

Captured with Lightshot

prnt.sc

 

[Uundastan]

Tell me why it shows 0?

Screenshot

Captured with Lightshot

prnt.sc

It is faulty. My main says it been up for 1hr and 13m forever now. Also CPU and Ram never change. Also had LB saying 100 and 100 for awhile. Just ignore it.

 

[urgodfather]

Not faulty. Check your configurations. Did you set the RIGHT interface name for your mic? Did you modify your ports? If so did you correct in in both nginx.conf files?

Start by looking at the How-To thread and work your way down. Also try using the ? and search. More than likely you are overlooking something.

 

[Uundastan]

Not faulty. Check your configurations. Did you set the RIGHT interface name for your mic? Did you modify your ports? If so did you correct in in both nginx.conf files?

Start by looking at the How-To thread and work your way down. Also try using the ? and search. More than likely you are overlooking something.

Might explain why the one on my main don't work. I changed the Admin Port. Didn't know I needed to also change it in nginx.conf file. Nope. It is right in my nginx.config file.

sudo nano /home/xtreamcodes/iptv_xtream_codes/nginx/conf/nginx.conf

Was still worth a look.

 

[Dudi]

Ports changed in nginx. It works on the main one, but not on the balancer. Everything worked, recently rebooted the server and stopped showing
Everything is OK on the main server, Problems with the balancer.

 

[urgodfather]

Ports changed in nginx. It works on the main one, but not on the balancer. Everything worked, recently rebooted the server and stopped showing
Everything is OK on the main server, Problems with the balancer.

did you change in BOTH nginx.conf files? if you change your http port for stream you have to fix 2 files. also you must set correct network interface for it to show network traffic.

 

[Dudi]

Screenshot

Captured with Lightshot

prnt.sc

The settings are the same on both servers