How to install Xtream UI with LB Complete Guide

[msn11]

Lets see;
1-format main server and fresh install Ubuntu 18.04 64 bits
2-Install main server as;

apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y

sudo reboot

Then

On main server run these commands


apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y

wget https://xtream-ui.com/install/install.py

sudo python install.py


On This command

sudo python install.py

system gives three options

MAIN,LB,ADMIN
First write MAIN

when this comand complete save sql pass and run again this command;
sudo python install.py
again it asks for
MAIN,LB,ADMIN
This time write ADMIN

and after completion you got main server access like

http://ip:25500

user: admin
Pass: admin
Reboot main server when back run this command or any time server not reachable

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

Main server established, now install Fresh Ubuntu 18.04 64 bits on LB servers
and start commands


apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y

sudo reboot


Then

sudo python install.py


On This command

apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y

wget https://xtream-ui.com/install/install.py

sudo python install.py

system gives three options

MAIN,LB,ADMIN
First write LB

when installation done
reboot LB and run this command to get server online

/home/xtreamcodes/iptv_xtream_codes/start_services.sh

Main server and LB installed

Now time to link LB sever to Main server

just open main server click on ad LB and fill fields and click on add.

Warning: after click add dont reload or refresh page.Open server on a new tab and wait 2-4 mints and load balance done.
From panel reload server and all ok


If anyone have any problem please message me.i Try to solve if i can !
>>>>>>>>>>>>>>ENJOY<<<<<<<<<<<<

 

[redhat]

Use BBcodes for the commands !!

 

[ahmed bro]

hello sir help me
i am new user i am installing xtream ui there are some problem
please help me
i have skype and anydesk

 

[jannek]

THX Nice howto

 

[msn11]

install all commands that we install on main server but on change is on load balance write LB

 

[jax]

What are the minumum requirements? Can I install Ubuntu on a old pc/notebook or do I need a dedicated VPS.
It's for me for experimental use not to sell iptv to 200 people.

 

[msn11]

if you can install ubuntu 18.04 64 bits
you have atleast 16gb Ram
have atleast 8 cores of processor and atleast 1gb of internet
Yes you can do

 

[mohammad idlbi]

you are a great man

 

[gg177]

Hello, when i try to install ""
sudo python install.py"" second also i mean admin.
It returns me error:
│ Invalid installation type │

 

[vinizn7]

Lets see;
1-format main server and fresh install Ubuntu 18.04 64 bits
2-Install main server as;

"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"

Then

On main server run these commands


"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py"

"sudo python install.py"


On This command

sudo python install.py

system gives three options

MAIN,LB,ADMIN
First write MAIN

when this comand complete save sql pass and run again this command;
sudo python install.py
again it asks for
MAIN,LB,ADMIN
This time write ADMIN

and after completion you got main server access like

http://ip:25500

user: admin
Pass: admin
Reboot main server when back run this command or any time server not reachable

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Main server established, now install Fresh Ubuntu 18.04 64 bits on LB servers
and start commands


"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"


Então

"sudo python install.py"


Neste comando

"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py "

"sudo python install.py"

sistema oferece três opções

PRINCIPAL, LB, ADMIN
Primeira gravação LB

quando a instalação estiver concluída
reinicie o LB e execute este comando para obter o servidor online

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Servidor principal e LB instalados

Agora é hora de vincular o servidor LB ao servidor principal

basta abrir o servidor principal, clicar no anúncio LB, preencher os campos e clicar em adicionar.

Aviso: depois de clicar em adicionar, não recarregue ou atualize a página. Abra o servidor em uma nova guia e aguarde de 2 a 4 minutos e faça o balanço de carga.
Do painel de servidor de recarga e tudo ok


Se alguém tiver algum problema, envie uma mensagem para mim. Tente resolver se eu puder!
>>>>>>>>>>>>>> APROVEITE <<<<<<<<<<<<
[/CITAR]
servidor não é mais do que 1gb xtream ui
O que outras pessoas estão dizendo

https://imgur.com/25H8koC

 

[rach]

Lets see;
1-format main server and fresh install Ubuntu 18.04 64 bits
2-Install main server as;

"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"

Then

On main server run these commands


"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py"

"sudo python install.py"


On This command

sudo python install.py

system gives three options

MAIN,LB,ADMIN
First write MAIN

when this comand complete save sql pass and run again this command;
sudo python install.py
again it asks for
MAIN,LB,ADMIN
This time write ADMIN

and after completion you got main server access like

http://ip:25500

user: admin
Pass: admin
Reboot main server when back run this command or any time server not reachable

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Main server established, now install Fresh Ubuntu 18.04 64 bits on LB servers
and start commands


"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"


Then

"sudo python install.py"


On This command

"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py"

"sudo python install.py"

system gives three options

MAIN,LB,ADMIN
First write LB

when installation done
reboot LB and run this command to get server online

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Main server and LB installed

Now time to link LB sever to Main server

just open main server click on ad LB and fill fields and click on add.

Warning: after click add dont reload or refresh page.Open server on a new tab and wait 2-4 mints and load balance done.
From panel reload server and all ok


If anyone have any problem please message me.i Try to solve if i can !
>>>>>>>>>>>>>>ENJOY<<<<<<<<<<<<

 

[pcr_91]

Thanks to you

 

[ebaturan]

Well done, Nice information

 

[Kevie]

I keep getting 404 errors any ideas

 

[Adeeeljaved]

show only two option MAIN,LB,

ADMIN Invalid installation type,

HOW two solve problem

 

[Kevie]

Lets see;
1-format main server and fresh install Ubuntu 18.04 64 bits
2-Install main server as;

"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"

Then

On main server run these commands


"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py"

"sudo python install.py"


On This command

sudo python install.py

system gives three options

MAIN,LB,ADMIN
First write MAIN

when this comand complete save sql pass and run again this command;
sudo python install.py
again it asks for
MAIN,LB,ADMIN
This time write ADMIN

and after completion you got main server access like

http://ip:25500

user: admin
Pass: admin
Reboot main server when back run this command or any time server not reachable

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Main server established, now install Fresh Ubuntu 18.04 64 bits on LB servers
and start commands


"apt-get update && apt-get upgrade -y && sudo apt-get install mysql-server -y && sudo apt-get install python -y && sudo apt install apache2 -y && sudo apt-get install libxslt1-dev -y && sudo apt-get install libgeoip-dev -y && apt-get update && apt-get upgrade -y"

"sudo reboot"


Then

"sudo python install.py"


On This command

"apt install python -y && apt-get update && apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y"

"wget https://xtream-ui.com/install/install.py "

"sudo python install.py"

system gives three options

MAIN, LB, ADMIN
First write LB

when installation done
reboot LB and run this command to get server online

"/home/xtreamcodes/iptv_xtream_codes/start_services.sh"

Main server and LB installed

Now time to link LB sever to Main server

just open main server click on ad LB and fill fields and click on add.

Warning: after click add dont reload or refresh page.Open server on a new tab and wait 2-4 mints and load balance done.
From panel reload server and all ok


If anyone have any problem please message me.i Try to solve if i can!
>>>>>>>>>>>>> ENJOY <<<<<<<<<<<<<
[/ QUOTE]

 

[Kevie]

Hiya, i keep getting 404 not found!! would you have any idea on fix??

 

[stimod]

thanks for it broo

 

[scottieboi]

Hello Thanks for this,

I get an Error when I try to finsh MAIN install

Can you help

 

[stimod]

Hello Thanks for this,

I get an Error when I try to finsh MAIN install

Can you help

sudo apt-get update && sudo apt-get upgrade -y

sudo apt-get install libxslt1-dev libcurl3 libgeoip-dev python -y

wget https://xtream-ui.com/install/install.py

sudo python install.py


type MAIN and press enter

then install admin panel with any release of xtream-ui.

Xtream UI

xtream-ui.com

apt-get install unzip e2fsprogs python-paramiko -y && chattr -i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && rm -rf /home/xtreamcodes/iptv_xtream_codes/admin && rm -rf /home/xtreamcodes/iptv_xtream_codes/pytools && wget "http://xtream-ui.com/releases/release_22e.zip" -O /tmp/update.zip -o /dev/null && unzip /tmp/update.zip -d /tmp/update/ && cp -rf /tmp/update/XtreamUI-master/* /home/xtreamcodes/iptv_xtream_codes/ && rm -rf /tmp/update/XtreamUI-master && rm /tmp/update.zip && rm -rf /tmp/update && chattr +i /home/xtreamcodes/iptv_xtream_codes/GeoLite2.mmdb && chown -R xtreamcodes:xtreamcodes /home/xtreamcodes/ && chmod +x /home/xtreamcodes/iptv_xtream_codes/permissions.sh && /home/xtreamcodes/iptv_xtream_codes/permissions.sh && /home/xtreamcodes/iptv_xtream_codes/start_services.sh