Welcome to World of IPTV

With

+23k members
+11k threads
+106k posts

we are the most popular IPTV community on the web. 

IMPORTANT NOTE:
WE HAVE RECENTLY NOTICED THAT TOO MANY DOUBLE FAKE ACCOUNTS ARE CREATED IN THE PAST.
TO PREVENT THIS ISSUE THE DECISION WAS MADE THAT IN THE FUTURE A ANNUALLY FEE 20 EURO WILL BE RAISED FOR NEW MEMBERSHIPS.

Join now to the World of IPTV

Forum Rules

Before you start, check out the forum rules first

Account upgrade

Upgrade your account to get access to full features

Advertising

Would you like to place your advertisement with us ?

Resources Manager

Hundreds of IPTV scripts and apps are available for download

Tutorial Basics for XUI.ONE

redhat

Administrator
Staff member
Administrator
Chief Moderator
Moderator
Joined
Jun 19, 2019
Messages
3,066
Reaction score
14,798
Points
134
Location
root[@]woi
Basics for XUI.ONE


Service Commands
service xuione <start|stop|reload|restart>
Example: service xuione start

Generate License
After a new installation, the license will be generated from the setup page. This can be access via: http://yoursite.com:8080/accesscode
Each installation has a unique access code, if yours for some reason doesn't work, try the Access Code instructions below.

If you've already installed and progressed past the setup page, but need to regenerate the license, or on a load balancer for example, try the below instructions:
  • Visit the XUI Billing Panel, log in and Reissue your license (for Main server only). Load balancers can skip this step.
  • Ensure your license number is in /home/xui/config/config.ini
  • Run the following commands on the server via SSH:
  • rm /home/xui/config/license
  • sudo -u xui /home/xui/bin/php/bin/php /home/xui/crons/license.php
The license.php will output information about your license and whether it is valid or not. If this doesn't work, and your license is definitely in the Reissued state, then you'll have to contact support or post on the forum.

No Access Code
If you can't access the admin interface, as you don't have an access code or the access code you have doesn't work, check /home/xui/bin/nginx/conf/codes/ to ensure there is a code that ends with .conf. If there is, try using this as your access code.

If there are no codes that end with .conf, or the ones that do are not for an admin interface login, then copy template to admin.conf and make the following changes:
  • Replace #CODE# with admin
  • Replace #TYPE# with admin
  • Delete #WHITELIST#
  • Enter mysql via your preferred method and run: USE `xui`; INSERT INTO `access_codes`( `code`, `type`, `enabled`, `groups`) VALUES ('admin', 0, 1, '[1]');
  • Run the following command via SSH: service xuione reload
  • You should now be able to access the admin panel via: http://yoursite.com:8080/admin

Login Error: "You do not have access"
This error relates to the access code specifically, it means the access code you're using is for a group that your user is not in. Make sure you're using the right user, or the right access code. If you can't access the panel because of this then use the instructions from the No Access Code section to create a new access code for admins.

MySQL Access Denied
If you're getting access denied on the main server, you're going to need to edit /home/xui/config/config.ini and change the username and password in the Encrypted section to match the credentials you were given when installing XUI, like this:

[Encrypted] username = "username" password = "password"

After saving, you can restart the panel and see if this has worked.

For load balancers, you can either follow the above steps or ensure that the main panel mysql is working then reinstall the laod balancer. There is also an option in Management -> Tools -> Quick Tools -> General that will regenerate mysql authentication for your load balancers. If this doesn't fix the issue, the XUI mysql user doesn't have permission to authorise external users. In which case you will have to ensure that the user does by granting the privilege, or allowing the load balancer IP manually. Either worst-case option here is an advanced procedure and may require external help.

Load Balancer Offline
Access the load balancer via SSH and run /etc/init.d/xuione stop then /etc/init.d/xuione start, this will tell you some information about what is wrong with the installation that prevents it from going online, it could be a mysql issue, it could be a license issue, or it could be something relating to libraries not being installed. Follow the trail.

Migration
In order to migrate your old database to XUI, a separate database has been created called xui_migrate which XUI has full access to. You will need to restore your migration SQL file to this database in order for migration to work.

You can restore the SQL file using the following shell command:
mysql xui_migrate < database.sql

You can migrate at any time by visiting: http://yoursite.com:8080/accesscode/setup

You can also manually migrate via SSH using the following command:
/home/xui/bin/php/bin/php /home/xui/includes/cli/migrate.php

If a failed migration causes issues with logging in, you can restore a blank database using the following command:
mysql xui < /home/xui/bin/install/database.sql

Reset Admin User
If you need to reset the admin user for any reason, you can run the following via mysql to restore user ID 1 to the username admin and password admin. Please change the username and password afterwards.

USE `xui`; REPLACE INTO `users`(`id`, `username`, `password`, `member_group_id`, `status`, `owner_id`, `date_registered`) VALUES(1, 'admin', '$6$rounds=20000$xui$eQfRsD2gsIUhoY5RnnYN82qiB5VeZTcHICQrFxXpa98J2R1454b6lzVHVjiJ.NP0gi0X3K7NXVgxeR1VhVhg61', 1, 1, 0, UNIX_TIMESTAMP());
 

dashti

Basic Member
Basic Member
Joined
Sep 30, 2021
Messages
34
Reaction score
4
Points
19
Location
pakistan
Basics for XUI.ONE


Service Commands
service xuione <start|stop|reload|restart>
Example: service xuione start

Generate License
After a new installation, the license will be generated from the setup page. This can be access via: http://yoursite.com:8080/accesscode
Each installation has a unique access code, if yours for some reason doesn't work, try the Access Code instructions below.

If you've already installed and progressed past the setup page, but need to regenerate the license, or on a load balancer for example, try the below instructions:
  • Visit the XUI Billing Panel, log in and Reissue your license (for Main server only). Load balancers can skip this step.
  • Ensure your license number is in /home/xui/config/config.ini
  • Run the following commands on the server via SSH:
  • rm /home/xui/config/license
  • sudo -u xui /home/xui/bin/php/bin/php /home/xui/crons/license.php
The license.php will output information about your license and whether it is valid or not. If this doesn't work, and your license is definitely in the Reissued state, then you'll have to contact support or post on the forum.

No Access Code
If you can't access the admin interface, as you don't have an access code or the access code you have doesn't work, check /home/xui/bin/nginx/conf/codes/ to ensure there is a code that ends with .conf. If there is, try using this as your access code.

If there are no codes that end with .conf, or the ones that do are not for an admin interface login, then copy template to admin.conf and make the following changes:
  • Replace #CODE# with admin
  • Replace #TYPE# with admin
  • Delete #WHITELIST#
  • Enter mysql via your preferred method and run: USE `xui`; INSERT INTO `access_codes`( `code`, `type`, `enabled`, `groups`) VALUES ('admin', 0, 1, '[1]');
  • Run the following command via SSH: service xuione reload
  • You should now be able to access the admin panel via: http://yoursite.com:8080/admin

Login Error: "You do not have access"
This error relates to the access code specifically, it means the access code you're using is for a group that your user is not in. Make sure you're using the right user, or the right access code. If you can't access the panel because of this then use the instructions from the No Access Code section to create a new access code for admins.

MySQL Access Denied
If you're getting access denied on the main server, you're going to need to edit /home/xui/config/config.ini and change the username and password in the Encrypted section to match the credentials you were given when installing XUI, like this:

[Encrypted] username = "username" password = "password"

After saving, you can restart the panel and see if this has worked.

For load balancers, you can either follow the above steps or ensure that the main panel mysql is working then reinstall the laod balancer. There is also an option in Management -> Tools -> Quick Tools -> General that will regenerate mysql authentication for your load balancers. If this doesn't fix the issue, the XUI mysql user doesn't have permission to authorise external users. In which case you will have to ensure that the user does by granting the privilege, or allowing the load balancer IP manually. Either worst-case option here is an advanced procedure and may require external help.

Load Balancer Offline
Access the load balancer via SSH and run /etc/init.d/xuione stop then /etc/init.d/xuione start, this will tell you some information about what is wrong with the installation that prevents it from going online, it could be a mysql issue, it could be a license issue, or it could be something relating to libraries not being installed. Follow the trail.

Migration
In order to migrate your old database to XUI, a separate database has been created called xui_migrate which XUI has full access to. You will need to restore your migration SQL file to this database in order for migration to work.

You can restore the SQL file using the following shell command:
mysql xui_migrate < database.sql

You can migrate at any time by visiting: http://yoursite.com:8080/accesscode/setup

You can also manually migrate via SSH using the following command:
/home/xui/bin/php/bin/php /home/xui/includes/cli/migrate.php

If a failed migration causes issues with logging in, you can restore a blank database using the following command:
mysql xui < /home/xui/bin/install/database.sql

Reset Admin User
If you need to reset the admin user for any reason, you can run the following via mysql to restore user ID 1 to the username admin and password admin. Please change the username and password afterwards.

USE `xui`; REPLACE INTO `users`(`id`, `username`, `password`, `member_group_id`, `status`, `owner_id`, `date_registered`) VALUES(1, 'admin', '$6$rounds=20000$xui$eQfRsD2gsIUhoY5RnnYN82qiB5VeZTcHICQrFxXpa98J2R1454b6lzVHVjiJ.NP0gi0X3K7NXVgxeR1VhVhg61', 1, 1, 0, UNIX_TIMESTAMP());
hello sir i have xui.one backup file i reinstall him ip and install him xui.one and upload him backup file in tmp folder
i give him first command
/home/xui/tools migration "/tmp/backup.sql"
and second command
/home/xui/bin/php/bin/php /home/xui/includes/cli/migrate.php

Connected to migration database.

Can't migrate from XUI to XUI! Use the restore functions instead.
this error is show please sir how to solve this issue
 

redhat

Administrator
Staff member
Administrator
Chief Moderator
Moderator
Joined
Jun 19, 2019
Messages
3,066
Reaction score
14,798
Points
134
Location
root[@]woi
hello sir i have xui.one backup file i reinstall him ip and install him xui.one and upload him backup file in tmp folder
i give him first command
/home/xui/tools migration "/tmp/backup.sql"
and second command
/home/xui/bin/php/bin/php /home/xui/includes/cli/migrate.php

Connected to migration database.

Can't migrate from XUI to XUI! Use the restore functions instead.
this error is show please sir how to solve this issue
xuione to xuione is not a migration, it's a restore !
You simply have to restore your old backup.
 
Channels MatchTime Unblock CDN Offshore Server Contact
100 cnx / 90€ 5Gbps / 180€ 48CPU-256GRAM 10Gbps 569€ Skype live:giefsl
500 cnx / 350€ 10Gbps / 350€ 48CPU-128GRAM 5Gbps / 349€ TG @changglobize
1000 cnx / 500€ 20Gbps / 700€ 40CPU-128GRAM 20Gbps / €980 http://coronaserver.com
Channels MatchTime Unblock CDN Offshore Server Contact
100 cnx / 90€ 5Gbps / 180€ 48CPU-256GRAM 10Gbps 569€ Skype live:giefsl
500 cnx / 350€ 10Gbps / 350€ 48CPU-128GRAM 5Gbps / 349€ TG @changglobize
1000 cnx / 500€ 20Gbps / 700€ 40CPU-128GRAM 20Gbps / €980 http://coronaserver.com
shape1
shape2
shape3
shape4
shape5
shape6
Top
AdBlock Detected

We know, ad-blocking software do a great job at blocking ads. But our site is sponsored by advertising. 

For the best possible site experience please take a moment to disable your AdBlocker.
You can create a Account with us or if you already have account, you can prefer an Account Upgrade.

I've Disabled AdBlock