Question Servers - How to use Internal Network on Panel?

[boxcabo]

Hi all.

How can i use the Internal Network of my Servers on Xtream-UI Panel?

Any help will be very appreciated.

Thank you very much.

 

[delta1372]

Your internal network with have a different IP address on the LAN side, connect using this LAN / internal IP and the panel should work just as though it was being accessed over the WAN / Internet port / IP address.

 

[delta1372]

Did you get this working mate?

 

[boxcabo]

Did you get this working mate?

No.
I don't know how to add the internal network as a load balancer.

 

[delta1372]

Ok, lets say for example you have the following setup...

Public IP: 123.123.123.123
LAN IP: 192.168.1.10

When you add your LB you would use the IP of 192.168.1.10 instead of the public IP 123.123.123.123

As long as the Main Server and the LB are both on the same 192.168.1.0/24 subnet then it should work just fine.

However, your customers will not be able to connect as the Main Server would pass 192.168.1.10 as the LB IP to your customers so you then run into other issues but this can be fixed by entering your Public IP of 123.123.123.123 as the VPN IP assuming you are using XUI.

 

[moskovic99]

There is no broadcast from lb servers in the internal network. All servers must have an external IP.