Welcome to World of IPTV

With

+23k members
+11k threads
+106k posts

we are the most popular IPTV community on the web. 

IMPORTANT NOTE:
WE HAVE RECENTLY NOTICED THAT TOO MANY DOUBLE FAKE ACCOUNTS ARE CREATED IN THE PAST.
TO PREVENT THIS ISSUE THE DECISION WAS MADE THAT IN THE FUTURE A ANNUALLY FEE 20 EURO WILL BE RAISED FOR NEW MEMBERSHIPS.

Join now to the World of IPTV

Forum Rules

Before you start, check out the forum rules first

Account upgrade

Upgrade your account to get access to full features

Advertising

Would you like to place your advertisement with us ?

Resources Manager

Hundreds of IPTV scripts and apps are available for download

Server with 2 Hard Drives but only 1 shows up on Panel

jlc72179

Extended Member
Ext. Member
Joined
Dec 5, 2020
Messages
23
Reaction score
9
Points
14
Location
USA
Newbie Here... Just bought a dedicated server with 2 hard drives. It has an SSD 500gb and a sata 4tb both with soft raids I believe. Anyway I am using it as my load balancer but when I load it to panel it only shows one of them basically the main panel that i loaded the OS on. I reallized the second drive is not partitioned but I did that but it still does not show up. Now i think you need seperate ip address to load the other drive but not sure if that can be done? My question is has anybody ever used a server with 2 drives and they both showed up on panel? what did you have to do? or is this not possible?
 

urgodfather

Banned
Banned
Ext. Member
Joined
Sep 22, 2019
Messages
2,098
Reaction score
5,928
Points
124
Location
neither here, nor there
Newbie Here... Just bought a dedicated server with 2 hard drives. It has an SSD 500gb and a sata 4tb both with soft raids I believe. Anyway I am using it as my load balancer but when I load it to panel it only shows one of them basically the main panel that i loaded the OS on. I reallized the second drive is not partitioned but I did that but it still does not show up. Now i think you need seperate ip address to load the other drive but not sure if that can be done? My question is has anybody ever used a server with 2 drives and they both showed up on panel? what did you have to do? or is this not possible?
No. That’s not right. If they both have soft raid then you probably have the 4 Tb in raid to that 500. Means you only see 500. Type these 2 commands and provide the results for each. lsblk is the first. df -h is the second.
Thinking that you need a second ip is completely asinine. Like way off in left field. If you managed to partition it then maybe you didn’t mount it? Do those two commands first and report back.
 

jlc72179

Extended Member
Ext. Member
Joined
Dec 5, 2020
Messages
23
Reaction score
9
Points
14
Location
USA
So I have loaded the OS on the 4tb hard drive and the SSD is the one in queston. I did mount it as well. I see that it looks like there 2 separted drive and not raided but then again i am a newbie here. Here is the results of the lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 3.7T 0 disk
├─sda1 8:1 0 511M 0 part /boot/efi
├─sda2 8:2 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sda3 8:3 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sda4 8:4 0 511M 0 part [SWAP]
sdb 8:16 0 3.7T 0 disk
├─sdb1 8:17 0 511M 0 part
├─sdb2 8:18 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sdb3 8:19 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sdb4 8:20 0 511M 0 part [SWAP]
nvme0n1 259:0 0 477G 0 disk
└─nvme0n1p1 259:3 0 477G 0 part /mnt/data
nvme1n1 259:1 0 477G 0 disk

Then here are the results of " df -h "

Filesystem Size Used Avail Use% Mounted on
udev 63G 0 63G 0% /dev
tmpfs 13G 2.4M 13G 1% /run
/dev/md3 3.6T 2.9G 3.4T 1% /
tmpfs 63G 0 63G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 63G 0 63G 0% /sys/fs/cgroup
/dev/md2 487M 80M 378M 18% /boot
/dev/sda1 510M 6.1M 504M 2% /boot/efi
tmpfs 114G 604K 114G 1% /home/xtreamcodes/iptv_xtream_codes/streams
tmpfs 2.0G 92K 2.0G 1% /home/xtreamcodes/iptv_xtream_codes/tmp
/dev/nvme0n1p1 469G 73M 445G 1% /mnt/data
tmpfs 13G 0 13G 0% /run/user/0

Thanks
 
Channels MatchTime Unblock CDN Offshore Server Contact
100 cnx / 90€ 5Gbps / 180€ 48CPU-256GRAM 10Gbps 569€ Skype live:giefsl
500 cnx / 350€ 10Gbps / 350€ 48CPU-128GRAM 5Gbps / 349€ TG @changglobize
1000 cnx / 500€ 20Gbps / 700€ 40CPU-128GRAM 20Gbps / €980 http://coronaserver.com

blackriderz

Extended Member
Ext. Member
Joined
Jan 4, 2020
Messages
46
Reaction score
328
Points
64
Location
Mars
So I have loaded the OS on the 4tb hard drive and the SSD is the one in queston. I did mount it as well. I see that it looks like there 2 separted drive and not raided but then again i am a newbie here. Here is the results of the lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 3.7T 0 disk
├─sda1 8:1 0 511M 0 part /boot/efi
├─sda2 8:2 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sda3 8:3 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sda4 8:4 0 511M 0 part [SWAP]
sdb 8:16 0 3.7T 0 disk
├─sdb1 8:17 0 511M 0 part
├─sdb2 8:18 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sdb3 8:19 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sdb4 8:20 0 511M 0 part [SWAP]
nvme0n1 259:0 0 477G 0 disk
└─nvme0n1p1 259:3 0 477G 0 part /mnt/data
nvme1n1 259:1 0 477G 0 disk

Then here are the results of " df -h "

Filesystem Size Used Avail Use% Mounted on
udev 63G 0 63G 0% /dev
tmpfs 13G 2.4M 13G 1% /run
/dev/md3 3.6T 2.9G 3.4T 1% /
tmpfs 63G 0 63G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 63G 0 63G 0% /sys/fs/cgroup
/dev/md2 487M 80M 378M 18% /boot
/dev/sda1 510M 6.1M 504M 2% /boot/efi
tmpfs 114G 604K 114G 1% /home/xtreamcodes/iptv_xtream_codes/streams
tmpfs 2.0G 92K 2.0G 1% /home/xtreamcodes/iptv_xtream_codes/tmp
/dev/nvme0n1p1 469G 73M 445G 1% /mnt/data
tmpfs 13G 0 13G 0% /run/user/0

Thanks

/dev/nvme0n1p1 469G 73M 445G 1% /mnt/data <-- is the SSD one ?
 

urgodfather

Banned
Banned
Ext. Member
Joined
Sep 22, 2019
Messages
2,098
Reaction score
5,928
Points
124
Location
neither here, nor there
So I have loaded the OS on the 4tb hard drive and the SSD is the one in queston. I did mount it as well. I see that it looks like there 2 separted drive and not raided but then again i am a newbie here. Here is the results of the lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 3.7T 0 disk
├─sda1 8:1 0 511M 0 part /boot/efi
├─sda2 8:2 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sda3 8:3 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sda4 8:4 0 511M 0 part [SWAP]
sdb 8:16 0 3.7T 0 disk
├─sdb1 8:17 0 511M 0 part
├─sdb2 8:18 0 511M 0 part
│ └─md2 9:2 0 511M 0 raid1 /boot
├─sdb3 8:19 0 3.7T 0 part
│ └─md3 9:3 0 3.7T 0 raid1 /
└─sdb4 8:20 0 511M 0 part [SWAP]
nvme0n1 259:0 0 477G 0 disk
└─nvme0n1p1 259:3 0 477G 0 part /mnt/data
nvme1n1 259:1 0 477G 0 disk

Then here are the results of " df -h "

Filesystem Size Used Avail Use% Mounted on
udev 63G 0 63G 0% /dev
tmpfs 13G 2.4M 13G 1% /run
/dev/md3 3.6T 2.9G 3.4T 1% /
tmpfs 63G 0 63G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 63G 0 63G 0% /sys/fs/cgroup
/dev/md2 487M 80M 378M 18% /boot
/dev/sda1 510M 6.1M 504M 2% /boot/efi
tmpfs 114G 604K 114G 1% /home/xtreamcodes/iptv_xtream_codes/streams
tmpfs 2.0G 92K 2.0G 1% /home/xtreamcodes/iptv_xtream_codes/tmp
/dev/nvme0n1p1 469G 73M 445G 1% /mnt/data
tmpfs 13G 0 13G 0% /run/user/0

Thanks

/dev/nvme0n1p1 469G 73M 445G 1% /mnt/data <-- is the SSD one ?

ok so it IS technically possible to do a RAID 1 with only 1 drive but that is pointless. based off of what you have shown, i wouldn't bother. just re-install the OS and make sure you choose your NVMe SSD drive.
 

jlc72179

Extended Member
Ext. Member
Joined
Dec 5, 2020
Messages
23
Reaction score
9
Points
14
Location
USA
So this is what I get when I load OS on the SSD. I did not mount our do anything to the sata drives. It looks like or is it logical to raid them first or better off using them separated and mount 1 drive?

PHP:
NAME        MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda           8:0    0   3.7T  0 disk
sdb           8:16   0   3.7T  0 disk
nvme0n1     259:0    0   477G  0 disk
├─nvme0n1p1 259:1    0   511M  0 part  /boot/efi
├─nvme0n1p2 259:2    0   511M  0 part
│ └─md2       9:2    0   511M  0 raid1 /boot
├─nvme0n1p3 259:3    0 475.4G  0 part
│ └─md3       9:3    0 475.4G  0 raid1 /
└─nvme0n1p4 259:4    0   511M  0 part  [SWAP]
nvme1n1     259:5    0   477G  0 disk
├─nvme1n1p1 259:6    0   511M  0 part
├─nvme1n1p2 259:7    0   511M  0 part
│ └─md2       9:2    0   511M  0 raid1 /boot
├─nvme1n1p3 259:8    0 475.4G  0 part
│ └─md3       9:3    0 475.4G  0 raid1 /
└─nvme1n1p4 259:9    0   511M  0 part  [SWAP]

PHP:
Filesystem      Size  Used Avail Use% Mounted on
udev             63G     0   63G   0% /dev
tmpfs            13G  884K   13G   1% /run
/dev/md3        468G  1.9G  443G   1% /
tmpfs            63G     0   63G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            63G     0   63G   0% /sys/fs/cgroup
/dev/md2        487M   80M  378M  18% /boot
/dev/nvme0n1p1  510M  6.1M  504M   2% /boot/efi
tmpfs            13G     0   13G   0% /run/user/0
 
Channels MatchTime Unblock CDN Offshore Server Contact
100 cnx / 90€ 5Gbps / 180€ 48CPU-256GRAM 10Gbps 569€ Skype live:giefsl
500 cnx / 350€ 10Gbps / 350€ 48CPU-128GRAM 5Gbps / 349€ TG @changglobize
1000 cnx / 500€ 20Gbps / 700€ 40CPU-128GRAM 20Gbps / €980 http://coronaserver.com

urgodfather

Banned
Banned
Ext. Member
Joined
Sep 22, 2019
Messages
2,098
Reaction score
5,928
Points
124
Location
neither here, nor there
So this is what I get when I load OS on the SSD. I did not mount our do anything to the sata drives. It looks like or is it logical to raid them first or better off using them separated and mount 1 drive?

PHP:
NAME        MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda           8:0    0   3.7T  0 disk
sdb           8:16   0   3.7T  0 disk
nvme0n1     259:0    0   477G  0 disk
├─nvme0n1p1 259:1    0   511M  0 part  /boot/efi
├─nvme0n1p2 259:2    0   511M  0 part
│ └─md2       9:2    0   511M  0 raid1 /boot
├─nvme0n1p3 259:3    0 475.4G  0 part
│ └─md3       9:3    0 475.4G  0 raid1 /
└─nvme0n1p4 259:4    0   511M  0 part  [SWAP]
nvme1n1     259:5    0   477G  0 disk
├─nvme1n1p1 259:6    0   511M  0 part
├─nvme1n1p2 259:7    0   511M  0 part
│ └─md2       9:2    0   511M  0 raid1 /boot
├─nvme1n1p3 259:8    0 475.4G  0 part
│ └─md3       9:3    0 475.4G  0 raid1 /
└─nvme1n1p4 259:9    0   511M  0 part  [SWAP]

PHP:
Filesystem      Size  Used Avail Use% Mounted on
udev             63G     0   63G   0% /dev
tmpfs            13G  884K   13G   1% /run
/dev/md3        468G  1.9G  443G   1% /
tmpfs            63G     0   63G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            63G     0   63G   0% /sys/fs/cgroup
/dev/md2        487M   80M  378M  18% /boot
/dev/nvme0n1p1  510M  6.1M  504M   2% /boot/efi
tmpfs            13G     0   13G   0% /run/user/0
OK so it looks like you actually have 4 drives total. 2 platters and 2 nvme's. the raid 1 is fine with the nvme's. now you need to make another softraid for sda and sdb. put that in raid 0. after you do that, format it to something like ext4. and mount it. once you're sure everything is good, add it to fstab. and give it a reboot to make sure it auto mounts.

Bonus material:

Once you have everything all working and auto mounting, you can move /home to /home_old, unmount that platter raid and mount it back as /home. copy the contents of /home_old to /home and edit your fstab to persist the new mountpoint. reboot again and boom, now you've got your OS on a raid 1 nvme array, and you have your /home on your 8 Tb raid 0 array. keep in mind that IF one of the platter drives fails, you will loose everything. 8 Tb isnt much to worry about though.

Another option:

make symlinks from your mount point to where ever you want.
 

jlc72179

Extended Member
Ext. Member
Joined
Dec 5, 2020
Messages
23
Reaction score
9
Points
14
Location
USA
Thanks a lot for all your help @urgodfather. I was able to follow what you told me. Although it took me a day or so to figure it out lol i got it done. So as I newb, one thing i learned was that only still only 1 Lb shows up on panel ( I thought i would have 2, the 500 ssd and then the 4tb so I would have 2 separate hard drive on panel but learning now thats not the case) that only one shows up and depending on how you mount your home determines what drive shows up on your panel. As a newb I also did not know what the codes where to move and copy folders and to change home directory but I got a great site that helped me step by step to the T just like @urgodfathers bonus instructions but in more depth, Here is the
please let me know if this is allowed. Anyway this is the first of many post that will be coming from me and hope you guys dont mind passing the knowledge. here was my final code
PHP:
NAME          SIZE FSTYPE            TYPE  MOUNTPOINT
sda           3.7T linux_raid_member disk
└─md0         7.3T ext4              raid0 /home
sdb           3.7T linux_raid_member disk
└─md0         7.3T ext4              raid0 /home
nvme0n1       477G                   disk
├─nvme0n1p1   511M vfat              part  /boot/efi
├─nvme0n1p2   511M linux_raid_member part
│ └─md2       511M ext4              raid1 /boot
├─nvme0n1p3 475.4G linux_raid_member part
│ └─md3     475.4G ext4              raid1 /
└─nvme0n1p4   511M swap              part  [SWAP]
nvme1n1       477G                   disk
├─nvme1n1p1   511M vfat              part
├─nvme1n1p2   511M linux_raid_member part
│ └─md2       511M ext4              raid1 /boot
├─nvme1n1p3 475.4G linux_raid_member part
│ └─md3     475.4G ext4              raid1 /
└─nvme1n1p4   511M swap              part  [SWAP]

Thanks and Happy New Years to all
 
Last edited:
shape1
shape2
shape3
shape4
shape5
shape6
Top
AdBlock Detected

We know, ad-blocking software do a great job at blocking ads. But our site is sponsored by advertising. 

For the best possible site experience please take a moment to disable your AdBlocker.
You can create a Account with us or if you already have account, you can prefer an Account Upgrade.

I've Disabled AdBlock